GE Vivid i - Page 185

Archiving
Vivid i User’s Manual 175
2378958-100 Rev. 02
2. Select Add.
The Code List window is displayed.
3. Select New.
4. Enter the new code.
5. Select Done to exit.
See also "The diagnostic codes sheet" on page 305.
Editing Demographic details
1. Press the PATIENT button on the control panel.
2. Select Patient Details.
The Patient information window is displayed.
3. Trackball to the field to edit.
4. Press
SET on the control panel.
5. Using the alphanumeric keyboard, edit the information.
Alternative: Press
any active scanning
mode key.
6. Press the EXAM LIST assignable to go back to the
Examination list window. OR
Press
PATIENT on the control panel to quit the archive.
WARNING
If you modify the Patient ID, Last name, First name or Date of
birth on a patient in the archive, be aware that the contents of the
archived images for that patient is not updated. If the images are
still in the buffer and not yet archived, the image files are updated
if you modify any patient information, but not if the images are
archived. So if any of these images are later on exported to
DICOM media or DICOM server, they will still contain the original
patient information, as it was before you did the modification in
the archive. The system does not alter the contents of the image
files at all when doing DICOM export.**
CAUTION
Do NOT use '\' or '^' in patient information fields, as these
characters might cause problems with some DICOM devices.