Archiving
Vivid i User’s Manual 161
2378958-100 Rev. 02
Creating a MPEGVue exam using the dataflow Local
Archive - Int. HD/eVue (eVue)
The dataflow must be configured before first time use as
follows:
1. Press
CONFIG and log on as administrator.
2. Select the Connectivity category and Dataflow subgroup.
The Dataflow sheet is displayed.
3. Select the dataflow Local Archive - Int. HD/eVue in the
Name pull-down menu.
Figure 8-3: The Dataflow Sheet
4. Select the eVue device in the Selected devices pane and
press Properties.
The eVue properties window is displayed.
To Next Page
Loading...
