Archiving
Vivid i User’s Manual 165
2378958-100 Rev. 02
To perform measurements on MPEGVue images:
1. In a 2D image, select the Measurement Tool (see
Figure 8-6)
The distance measurement tool is automatically selected.
2. Perform the distance measurement.
To perform an area measurement, right-click on the imageand
select Area. Then perform the area measurement.
In other modes, select the Measurement Tool (see Figure 8-6)
and perform the measurement.
E-Mail support for MPEGVue
Sending images or examinations via E-mail
The selected image or the entire examination can be send by
e-mail as an attachment. providing that the computer has a
mail client application (e.g. MS Outlook, MS Outlook Express).
To send an image:
1. Select the image to send on the clipboard and press the
E-mail button (see Figure 8-6).
The E-Mail dialog window is displayed (Figure 8-7).
Figure 8-7: The E-mail dialog window
2. Select Send Current Image.
The E-mail address window is displayed (Figure 8-8).
To Purchase, Visit Avobus.com or call 1-800-674-3655
To Next Page
Loading...
