Archiving
Vivid i User’s Manual 199
2378958-100 Rev. 02
• The DICOM server AE title (the server’s name)
Typically source for this information in the network
administrator.
Setup of the DICOM server in the scanner’s configuration
management package
DICOM dataflow selection
1. Press
CONFIG and log on as administrator.
2. Select the Connectivity category and Dataflow subgroup.
The Dataflow sheet is displayed.
3. Select the DICOM dataflow to configure in the Name
pull-down menu (see Figure 8-32).
Figure 8-32: The Dataflow sheet
DICOM devices configuration
Depending on the DICOM dataflow selected, one or several
DICOM devices may have to be configured.
1. Select a DICOM device in the Selected devices pane and
To Next Page
Loading...
