GE Vivid i - Page 225

Archiving
Vivid i User’s Manual 215
2378958-100 Rev. 02
Remote paths of
network volumes
must be entered
once in the Remote
Path field before
they can be selected
from the Destina-
tion pull-down
menu.
2. Select a removable media or a network volume remote path
as the destination in the Destination pull-down menu.
3. Select OK and press
CONFIG.
Configuring an HL7 Export
1. Select the HL7 device in the Selected devices pane and
press Properties.
The HL7 properties window is displayed.
Figure 8-46: The HL7 properties window
2. When configuring this feature for the first time, the path for
the HL7 export destination must be entered in the Remote
path field (format: \\server-name\share-name).
3. Select OK and press
CONFIG.
Configuring an MPEGVue Export
1. Select the eVue device in the Selected devices pane and
press Properties.
The eVue properties window is displayed (Figure 8-4,
page 162).
Remote paths of
network volumes
must be entered
once in the Remote
Path field before
they can be selected
from the Destina-
tion pull-down
menu.
2. Select a removable media or a network volume remote path
as the destination in the Destination pull-down menu.
3. Check the options as required.
4. Select OK and press
CONFIG.