GE Vivid i User Manual

Archiving
Vivid i User’s Manual 231
2378958-100 Rev. 02
and user presets.
OR
• One or several System configuration items to restore
parts of the system settings and user presets (see
Figure 8-63).
5. Make sure that Backed up copy is selected.
6. Select the appropriate Source device.
7. If restore is done from a backup on a removable media,
insert the media in the drive.
8. Select Restore now.
Depending on the selection, one or two Restore
confirmation windows are displayed (Figure 8-64):
Figure 8-64: Restore confirmation windows
9. Ensure that the correct source is selected an select OK.
The selected items are copied to the systems. If items from
the system configuration are restored the system needs to
be rebooted. The Reboot system window is displayed
(Figure 8-65).
Figure 8-65: Reboot system prompt
10. Select OK to reboot the system.
CAUTION
The Restore procedure OVERWRITES the existing data on the
local hard drive. Make sure to select the correct device.
To Purchase, Visit Avobus.com or call 1-800-674-3655

GE Vivid i Specifications

General

Type	Portable Ultrasound System
Transducer Ports	2 active ports
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Imaging Modes	2D, M-Mode
Connectivity	DICOM, Ethernet, USB
Applications	Vascular, Abdominal
Weight	Approximately 5.5 kg (12.1 lbs)
Battery Life	Up to 1 hour (depending on usage)
Probes	Phased array, Linear array, Convex array