Report
Vivid i User’s Manual 239
2378958-100 Rev. 02
To choose another report template
1. Press the assignable TEMPLATE.
The Template selec-
tion menu can be
configured to dis-
play only the tem-
plates of interest
(see page 259).
The Template selection menu is displayed showing the
available report templates organized by application.
2. Do one of the following:
• Select a template from the current application template
list.
• Select another application and select the desired
template from the sub-menu displayed.
Note: From a sub-menu, select Back to return to the
current application template list.
The selected template is displayed on the screen.
Note: After selecting a different report template the selected
template becomes the default template which will be selected
next time
To change patient information
1. Trackball to heading of the information to change.
The trackball marker is changed to a hand with pointing
finger .
2. Press
SET on the Trackball area.
The original location of the data is displayed.
3. Change the information entered if required.
4. Press
REPORT when completed.
To add an image to the report
Images are inserted in the report by dragging a selected image
from the clipboard into an Image container in the report.
1. Trackball to the Image of interest in the Image clipboard.
2. Press and hold down the
SET key, and using the trackball,
drag the selected image in the Image container in the
report.
3. To move images between image containers, press and
hold down the
SET key, and using the trackball, drag the
selected image to the new location.
4. To remove an image from the report, press and hold down
the
SET key, and using the trackball, drag the selected
image back to the clipboard.
To Next Page
Loading...
