Getting started
16 Vivid i User’s Manual
2378958-100 Rev. 02
Figure 1-3: Peripherals/Accessory Connector Panel
1. Two interchangeable USB ports (digital printer, CD-RW and other peripherals
2. Docking connector - for future external devices
3. Port for DC IN (AC Power Adapter)
4. SVGA Output (VCR option or External monitor)
5. LAN 10/100 Base-TX Ethernet network connector
6. PCMCIA port for wireless card
7. Ejection lever for PCMCIA device
WARNING
Accessory equipment connected to the analogue and digital
interfaces must be certified according to the respective IEC
standards (e.g. IEC 60950 for data processing equipment and
IEC 60601-1 (1988) for medical equipment). Any person
connecting additional equipment to the signal input part or
output part is configuring the medical system, and is therefore
responsible that the system complies with the requirements of
the system standard IEC 60601-1-1 (2000). If in doubt, consult the
technical service department or your local representative.
Do not touch the conducting parts of the USB or Ethernet cables
when connecting equipment to the unit.
CAUTION
The connection of equipment or transmission networks other
than as specified in these instructions can result in electric
shock hazard. Alternate connections will require verification of
compatibility and conformity to IEC/EN 60601-1-1 by the installer.
To Next Page
Loading...
