Report
252 Vivid i User’s Manual
2378958-100 Rev. 02
Figure 9-10: The Measurements box
4. Enter a heading (e.g. 2D).
5. Using the Filter criteria, define the type of measurements to
be entered (e.g. Cardiac, 2D, measured and calculated).
The Measurement list on the left side is updated.
6. From the measurement list, select the measurement to
insert and press Add. Both single measurements or a folder
may be added.
7. The list of the inserted measurements is displayed in the
Selected measurement list on the right side.
8. Press OK.
9. Select the next table cell and repeat steps 3 to 8 to insert
several measurements.
To Purchase, Visit Avobus.com or call 1-800-674-3655
To Next Page
Loading...
