GE Vivid i User Manual

Presets and System setup
Vivid i User’s Manual 295
2378958-100 Rev. 02
Configuration of the Application menu
The Application menu can be configured by moving the
applications up and down inside the pop-up menu and from
one level to the other.
To move an application inside one level
1. Trackball to the application to move.
2. Press
SET.
3. Press .
The application is moved one step up.
Press Default to
get factory setting.
4. Press .
The application is moved one step down.
To move an application from one level to the other
1. Trackball to the application to move.
2. Press SET.
3. Press as many times as necessary:
• if the application to move is in the More menu
• if the application to move is in the Applications menu
till the application has moved to the other menu.

GE Vivid i Specifications

General

Type	Portable Ultrasound System
Transducer Ports	2 active ports
Doppler Modes	Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler
Imaging Modes	2D, M-Mode
Connectivity	DICOM, Ethernet, USB
Applications	Vascular, Abdominal
Weight	Approximately 5.5 kg (12.1 lbs)
Battery Life	Up to 1 hour (depending on usage)
Probes	Phased array, Linear array, Convex array