Presets and System setup
312 Vivid i User’s Manual
2378958-100 Rev. 02
Dataflows available
A set of pre-defined dataflows is available on the unit as listed
in the table below. Input/output devices cannot be
added/removed to/from the pre-defined dataflows. However the
settings for the devices can be adjusted (see page 316).
Dataflow Description
No Archive Enables to perform an examination
without storing the data to the
archive.
LocalArchive-Int.HD Local archive internal harddrive
The local database is used for
patient archiving. Images are stored
to internal harddrive.
LocalArchive-MOD Local archive Magneto Optical
Disk (MOD)
The local database is used for
patient archiving. Images are stored
to a MOD. The stored image files will
consist of raw data only, together
with a single-frame DICOM preview
image (no DICOM multi-frame is
stored).
LocalArchive-Int.HD/MOD Local archive internal harddrive
and Magneto Optical Disk
The local database is used for
patient archiving. Images are stored
to the internal harddrive and to a
MOD as DICOM Media. The stored
image files, both to internal harddrive
and to the MOD, will consist of both
DICOM (multi-frame if cineloop) and
raw data.
Local Archive - Int
HD/DICOM Server
The local archive is used for patient
archiving. Images are stored to the
internal hard drive and to a DICOM
server.
Some of the measurements are
stored if DICOM SR is turned on (see
page 202)
To Purchase, Visit Avobus.com or call 1-800-674-3655
To Next Page
Loading...
