Niro Soavi S.p.A
2.1. SAFETY
These INSTRUCTIONS FOR USE & MAINTENANCE are part of the machine
and should accompany it throughout its service life until disposed of.
Before starting ANY operation, consult the relevant Section of these
INSTRUCTIONS.
Make sure that nobody has access to the machine before getting thoroughly
acquainted with these Instructions.
The only operations allowed are those described in these INSTRUCTIONS;
for any operation other than these, contact NIRO SOAVI Customer
Service.
CAUTION: Do not attempt tampering the calibration of any component or
part of the machine or to modify any parameter of programmable devices
unless expressly authorized in writing by NIRO-SOAVI.
Any calibration carried out by NIRO-SOAVI at the time of testing has the
purpose of ensuring the machine’s safety and troublefree operation: any
unauthorized modification will void the machine’s guarantee immediately.
Because the tampering of any safety device may undermine the safety of
the equipment, NIRO-SOAVI shall not be held liable for damages in case
of accidents resulting from such unauthorized modification.
Keep these INSTRUCTIONS FOR USE AND MAINTENANCE within the
operator's reach and make sure that their place of storage is suitable to
protect them from accidental damage.All operators must be thoroughly
familiar with the instructions given in this manual, comply with safety
regulations, use personal protection devices and avoid wearing clothes or
accessories which could get drawn into moving machine parts.
Operators must be familiar with the instructions given in this manual
before they can do any work on and with the machine.
WARNING: For safety during transport, the machine is supplied WITHOUT
LUBRICATION OIL. Before starting the machine fill with oil as described in
Section 4 -MAINTENANCE.
2C001E0C.DOC 2.1.1
To Next Page