Niro Soavi S.p.A
3.3. START-UP PROCEDURE
3.3.1 OPERATOR’S POSITION
To ensure the safe use of the machine during start-up and adjustment
operations, we recommend that the operator should stand as indicated in figure
3.3.1.
The control panel - configurated according to the Customer's requirements - is
on the left hand side of the machine front; an EMERGENCY STOP PUSH-
BUTTON is always fitted on each machine.
ATTENTION: Adequate free space must be provided in front of the
machine under any circumstances in order to allow immediate access to
the emergency push-button and any start/stop or setting devices.
.
FIGURE 3.3.1
3C001E0C.DOC 3.3.1
To Next Page
Loading...
