Niro Soavi S.p.A
3.1. GENERALS
The NIRO-SOAVI Homogenizer consists of a positive-displacement piston pump
provided with automatic valves with suction and delivery spring , connected to a
homogenizing section where the product undergoes the process of high-pressure
micronization to reduce the size of the solid particles suspended in the fluids and
achieve homogenous dimensional distribution.
This process can be applied to a wide range of products with variable viscosity,
and it allows to obtain more stable suspensions through micronization and
dissipation of solid particles, depending on the level of pressure applied.
To find out about the specific configuretion of the machine, model, technical data,
accessories and optionals, see Section 1 - TECHNICAL SPECIFICATIONS.
WARNING: For safety during transport, the machine is supplied
WITHOUT LUBRICATION OIL inside the drive section.
Before carrying out any operation fill with oil as described in Section 4 –
MAINTENANCE, paragraph 4.9 LUBRICATION.
3C001E0C.DOC 3.1.1
To Next Page
Loading...
