Niro Soavi S.p.A
2.3. IDENTIFICATION OF THE MACHINE
The machine is identified by the name plate (fig.2.2.1) located on the front panel
(or on the pulley protection panel, for the Hercules versions without casing),
which includes
- the manufacturer's name
- model and type
- serial number.
The serial number is also punched on the compression head.
This number should always be quoted in any correspondence addressed to
NIRO-SOAVI's Customer Service in order to identify the machine properly.
2C001E0C.DOC 2.3.1
To Next Page
