GEA ARIETE - Safety Standards for Sockets; Socket for MY

MY New model
MY New model
8
Socket for MY
Track-mounted (DIN Track) Socket
Conforms to VDE 0106, Part 100
Snap into position along continuous sections of any
mounting track.
Facilitates sheet metal design by standardized
mounting dimensions.
Design with sufficient dielectric separation between
terminals eliminates the need of any insulating
sheet.
RC+
Safety Standards for Sockets
Model Standards File No.
PYF08A-E, PYF08A-N
P
Y
F
1
A
E
P
Y
F
1
A
N
UL508 E87929
,
PYF14A-E, PYF14A-N
CSA22.2 LR31928
Back-connecting Sockets
Specifications
Item Pole Model Carry current Dielectric withstand
voltage
Insulation resistance
(see note 2)
Track-mounted
S
k
t
2
PYF08A-E 7A
2,000 VAC, 1 min 1,000 M
!
min.
Socket
PYF08A-N (see note 3) 7 A (see note 4)
,
,
,
4
PYF14A-E 5A
PYF14A-N (see note 3) 5 A (see note 4)
Back-connecting
S
k
t
2
PY08(-Y1)
7A 1,500 VAC, 1 min 100 M
!
min.
g
Socket
PY08QN(-Y1)
,
,
PY08-02
4
PY14(-Y1)
3A
PY14QN(-Y1)
PY14-02
Note:
1. The values given above are initial values.
2. The values for insulation resistance were measured at 500 V at the same place as the dielectric strength.
3. The maximum operating ambient temperature for the PYF08A-N and PYF14A-N is 55
"
C.
4. When using the PYF08A-N or PYF14A-N at an operating ambient temperature exceeding 40
"
C, reduce the current to 60%.