Niro Soavi S.p.A
2.6. RECEIVING AND CHECKING THE MACHINE
Unless specified otherwise in the Order Confirmation, once the machine has left
the Manufacturer's premises, any damage shall be under the responsibility of
the carrier - whether an independent one or a Customer's employee.
Therefore, when receiving the machine, the following should be checked:
- contents of the packing against the Packing List;
- integrity of the packing, so that any evident damage can be immediately
reported to the carrier;
- any damage suffered by the machine as a result of improper transport by the
carrier.
In order to minimize the amount of inconvenience for the Customer, NIRO-
SOAVI Shipping Department is always available to assist with clarifications,
evaluation of any damages, and any other action required to restore the
machine to its proper and safe conditions.
2C001E0C.DOC 2.6.1
To Next Page