Niro Soavi S.p.A
WARNING: Before handling the machine, make sure that the route to be
followed and the intended place of installation are clear of any obstacle.
WARNING: Operators are required to read these instructions before
handling the machine; all personnel involved in handling of the machine
must be acquainted with transport and handling regulations, as well as
with regular safety standards.
WARNING: Use only tested hoisting devices approved to support the
machine’s weight, as indicated in the dimension drawing in Section 1 –
TECHNICAL SPECIFICATIONS.
Do not under any circumstances leave suspended loads and never stand
below suspended loads.
WARNING: The floor on which the machine is to be placed must withstand
to at least 150% of the machine’s weight indicated in the “Installation
Drawing” in Section 1 – TECHNICAL SPECIFICATIONS.
2C001E0C.DOC 2.5.3
To Next Page
Loading...
