Niro Soavi S.p.A
2.12. DEMOLITION AND DISPOSAL
The demolition and disposal of the machine must be carried out in compliance
with various procedures according to the type of material to be disposed of.
First of all, it is necessary to:
- discharge lubricating and hydraulic oils for separate disposal;
- disassemble the electric system (components, cables and protection
sheaths) and all the plastic parts for separate disposal.
The machine is manufactured with the following materials, in various quantities:
- stainless steel;
- steel alloys and steel for construction purposes;
- cast iron.
The following are also present in very limited amounts:
- aluminium;
- copper;
- bronze;
- ceramic;
- PTFE;
- nitrile;
- viton;
- PVC.
- PEEK
- Elastomers and plastic materials.
All these materials must be disposed of in compliance with the regulations
currently in force in the country at the time of disposal.
2C001E0C.DOC 2.12.1
To Next Page
Loading...
