GEA ARIETE - 2.2. CE MARK AND ISO 9000 CERTIFICATION

Niro Soavi S.p.A
2.2. CE MARK AND ISO 9000 CERTIFICATION
The machine has been designed and built in accordance with EEC standards
on the safety of equipment (CEE/98/37).
NIRO-SOAVI guarantees that this machine complies with the above-mentioned
standard by marking the front of the machine with "CE" as shown in figure 2.2.1
here below, on the front part of the machine.
In Section 1 – TECHNICAL SPECIFICATIONS we have attached the
Declaration of Conformity CE of the machine.
TYPE
S.N.
RATED FLOW
(
dm
3
/h
)
MAX PRESS.
Y
EAR
via M. da Erba Edoari, 29/A 43100 PARMA (ITALY)
Niro Soavi S.p.A.
FIGURE 2.2.1
In addition to this, NIRO SOAVI is certified according to UNI EN ISO 9001 for
design, manufacturing and servicing of homogenisers and high pressure
pumps, therefore your machine has been enginnereed and produced according
to approved quality procedures.
See figure 2.2.2 for the UNI EN ISO 9001 Quality System Certificate.
2C001E0C.DOC 2.2.1