VLT
®
5000 Series
Description of choice:
At Trip [0] the VLT frequency converter will stop the
motor within a few seconds (depending on drive
size).
At Warning [1] only a warning will be exported when
a mains failure occurs, but in severe cases, other ex-
treme conditions might result in a trip.
NB!:
If Warning has been selected, the life
expectancy of the drive will be reduced when
the mains failure persists.
NB!:
At phase loss, the internal cooling fans of
some drive types cannot be powered. In or-
der to avoid overheating, an external power supply
can be connected to VLT 5032 - 5052 200 - 240 V
and VLT 5075 - 5500 380 - 500 V, see Electrical in-
stallation .
✭ = factory setting. () = display text [] = value for use in communication via serial communication port
MG.51.A1.02 - VLT is a registered Danfoss trade mark
156
To Next Page
Loading...
