Niro Soavi S.p.A
• Give power using the main switch on the electric power board
• Press the start push-button. In case the control board has been supplied by
NIRO-SOAVI, this operation allows to start the machine according to the
correct sequence, depending on the type of machine and optionals provided:
- opening of any utility solenoid valve (optional)
- start of the oil motor-driven pump (if this type has been provided)
- start of electric fans (if provided)
- start of main motor.
In case the control board is supplied by the Customer, the correct operating
sequence is provided (see Section 1 – TECHNICAL SPECIFICATIONS), and
should be observed strictly.
To identify the machine configuration refer to Section 1 – TECHNICAL
SPECIFICATIONS.
3C001E0C.DOC 3.3.4
To Next Page
Loading...
