Gerber Sabre - Routing job workflow; Job execution and control

54 Sabre Owner’s Guide
Maintenance
This section provides guidelines for maintaining the Sabre router in good operating condition.
Proper maintenance is based on daily inspection and daily and weekly cleaning.
Daily inspection
Sabre Component Inspect For:
Entire machine surface Chips, mist coolant buildup
X and Y ways Debris
Lead screws Debris
Router motor carriage Debris
Mist coolant nozzle Coolant buildup
Mist coolant tank Coolant level
Electrical cabinet air
filter
Debris
Daily cleaning
WARNING: Disconnect the Sabre from the AC power outlet before performing any
cleaning procedure.
Recommended cleaning supplies
♦
Vacuum
♦
Lint-free cloth
♦
Hand broom
♦
1" (25 mm) nylon or natural bristle brush
♦
2.5 mm and 4 mm hex head wrenches
♦
Light machine oil (3-IN-ONE®, Marvel™ Mystery oil, or 10 weight machine oil)