Gerber Sabre - Index

Index 71
Index
A
Acceleration, setting............................... 20
Acrylic, routing....................................... 48
Active cutting area ........................... 10, 54
Actual material thickness...................... 32
Adjust depth key.............................. 15, 37
AI format ................................................... 8
Aluminum, routing................................ 47
Arrow keys.............................................. 15
ART Path ................................................... 9
ATC.......................................................... 73
Automatic Tool Changer....................... 73
Axes of movement ................................... 9
B
Boundaries .............................................. 54
Brass, routing.......................................... 47
C
Checklist, pre-job.................................... 42
Chip removal system......................... 8, 29
using .................................................... 30
Clamps..................................................... 44
Cleaning................................................... 58
electrical cabinet................................. 60
lead screw ........................................... 59
table surface........................................ 59
X way................................................... 59
Y way................................................... 59
Collets ...................................................... 25
Configuration settings........................... 16
Control pad ......................................... 7, 13
key functions ...................................... 14
Customer support .................................... 2
Cutting
non-through............................ 10, 31, 32
through.................................... 10, 31, 32
tools...................................................... 25
D
Daily inspection...................................... 58
Data type ................................................. 24
Default configuration settings.............. 16
Design programs...................................... 8
Display language, changing ................. 18
DXF format................................................ 8
E
Electrical cabinet....................................... 6
Emergency
power switch ........................................ 7
stopping............................................... 53
Engraver option...................................... 73
EPS format................................................. 8
Error messages........................................ 68
F
Fast key.................................................... 15
FastFacts .................................................... 2
Feed key................................................... 15
Feed rate .................................................. 49
overriding ........................................... 15
File formats ............................................... 8
Firmware revision.................................. 11
Function keys.......................................... 15
G
G Code job............................................... 24
Ground strap cable................................... 8
installing.............................................. 29
H
Hardwood, routing................................ 46
High frequency spindle
option................................................... 72
selecting............................................... 12
Holding down material......................... 43
Home key .......................................... 10, 15
HPGL format ............................................ 8
I
Initialization gage............................. 34, 35
Initialize
from material surface ........................ 15
from table surface .............................. 15
Initializing
Z axis.............................................. 10, 52
Inplace repeats........................................ 54
J
Job
boundaries .......................................... 54
control keys......................................... 14
data type.............................................. 24