68 Sabre Owner’s Guide
Options
This section provides an overview of the options, which may be purchased with the Sabre.
Refer to the section “Using the T-Vac” for more information. Information on other options’ uses
are described in the user guide provided with each option. The options discussed in this section
are:
♦
High Frequency Spindle Option
♦
Mist Coolant
♦
T-Vac
♦
Engraver
♦
Automatic Tool Changer
High Frequency Spindle Option
The optional High Frequency Spindle replaces the standard 3¼ hp router. It provides quiet,
variable-speed operation up to 24,000 rpm. The speed is selected from the control pad or in ART
Path.
The Speed Controller is contained in a NEMA 12 housing which protects it from the cutting
debris. The Speed Controller stands on the floor near the Sabre.
Mist Coolant Option
The Mist Coolant Option sprays a fine lubricant mist on the cutting tool to cool and lubricate it
when cutting metals such as aluminum or brass. It is not used when cutting non-metallic
materials such as wood or plastic.
To Next Page
Loading...
