Operation User mode
User mode
Easy Modus
.
Margin before record (minutes):
Here you can set the lead time for timer recordings in minutes.
Margin after record:
Here you can set the delay time for timer recordings in minutes.
Show blinking clock in display during recording:
Here you can select whether the OLED display while recording the clock to display flash.
Infobar - Display time:
Specify how long the info bar will be displayed, a maximum of 10 seconds.
Advanced Mode:
Additional settings for Simple mode.
Recordings always have priority:
Here is the option chosen Yes, the system automatically switches to a timer recording conflict on the
station to be recorded.
If the option is set to No, you are asked if you want to switch on the channel to be recorded.
Show positioner movement:
Is your satellite system equipped with a rotor, on the TV, a flashing symbol of an antenna is shown,
unless you have asked the option to Yes.
Multi bouquets:
If you want to use more than one bouquet you set this option to Yes.
Change bouquets in Quickzap:
If this option is set to Yes, automatically at the end of the bouquet changed to the next bouquet.
Alternative radio mode:
If this option is set to Yes, the GigaBlue Box behaves just as in TV mode.
Action on long press on Power:
When long press the power button the following options are given:
Show shutdown or immediate shutdown.
45
To Next Page
Loading...
