GWN7000 User Manual
Version 1.0.6.28
Also, users can use the drop-down list filter to filter the vouchers that where
created at specific date-time.
The following table summarizes description for voucher configuration parameters:
Table 43: Voucher Parameters
Specify how many vouchers to generate which will have same
profile/settings (duration, bandwidth and number of users).
Specify how many users can use the voucher.
Specify the duration after which the voucher will expire, and clients
will be disconnected from internet.
Note: in case or multiple users, the duration will start counting after
first user starts using the voucher.
Set the validity period of credentials, limited to 1-365 integer. The unit
is day.
Set the downstream bandwidth speed limit (in Kbps or Mbps).
Set the upstream bandwidth speed limit (in Kbps or Mbps).
Notes for the admin when checking the list of vouchers.
Using Voucher with GWN captive portal
In order to successfully use the voucher feature, users will need to create a captive portal in order to request
voucher authentication codes from users before allowing them access to internet. More details about
captive portal will be covered on next section but for voucher configuration please follow below steps.
1. Go under “Captive Portal → Captive portal” menu.
2. Press in order to add new captive portal policy.
3. Set the following parameters as shown on the screenshot for basic setup then save and apply.
To Next Page
Loading...
Need help?
General
