Grandstream Networks GWN7000 - Table 32: PPTP Server Configuration Parameters; Figure 61: PPTP Server Configuration

P a g e | 98
GWN7000 User Manual
Version 1.0.6.28
Figure 61: PPTP Server Configuration
Table 32: PPTP Server Configuration Parameters
Field
Description
Enable
Click on the checkbox to enable the PPTP VPN Server.
VPN Name
Enter a name for the PPTP Server.
PPTP Server Address
Configure the PPTP server local address (ex: 192.168.1.1).
Client Start Address
Configure the remote client IP start address.
Note: this address should be in the same subnet as the end address
and PPTP server address.
Client End Address
Configure the remote client IP end address.
Note: this address should be in the same subnet as the start address
and PPTP server address.