Grandstream Networks GWN7000 User Manual

P a g e | 97
GWN7000 User Manual
Version 1.0.6.28
Destination
Choose to which destination group or WAN to allow traffic from the
VPN, this will generate automatically a forwarding rule under the
menu Firewall → Traffic Rules → Forward.
Remote Subnet
Configures the remote subnet for the VPN.
The format should be “IP/Mask” where IP could be either IPv4 or
IPv6 and mask is a number between 1 and 32.
For example: 192.168.5.0/24
IP Masquerading
This feature is a form of network address translation (NAT) which
allows internal computers with no known address outside their
network, to communicate to the outside. It allows one machine to act
on behalf of other machines.
Use DNS from Server
Enable this option to retrieve DNS from the VPN server.
Number of Attempts to
Reconnect
Configures the number of attempts to reconnect the PPTP client, if
this number is exceeded, the client will be disconnected from the
PPTP Server.
Use Built-in IPv6 management
Enable the IPv6 management for the VPN.
MPPE
Enable / disable the MPPE for data encryption. By default, it’s
disabled.
2- Click after completing all the fields.
3- Click on top of the web UI to apply changes.
Figure 60: PPTP Client
GWN7000 PPTP Server Configuration
To configure PPTP server on the GWN7000, go to “VPN→PPTP→Server” and set the following:
1- Click on and the following window will pop up.

Grandstream Networks GWN7000 Specifications

General

Brand	Grandstream Networks
Model	GWN7000
Category	Network Router
Language	English