SpectroEye™28
2
Select Reference
This icon is used to modify jobs or measurement
series for which various references have been
defined. This function determines which reference
is assigned to a sample. The assignment may be
manually defined or performed automatically by
the SpectroEye.
Modify reference
Within a given job or series, this icon permits creation
of new references or modification of existing ones.
Reference parameters
This icon is used to set a new name and a new
measurement tolerance for a reference.
Save in database
This icon is used to save a measured reference into
a created reference library.
Sample
This icon allows you to scroll through the samples
created within a job or to cancel them.
4. Other icons
Print
The various print options can be selected using
this icon.
Special icon: Measurement conditions
This icon allows the measurement conditions
to be modified.
Read chapter 2.4.2.4
2 • Use
Read chapter 2.4.2.1
Read chapter 2.4.3.3
Read chapter 2.4.1.5
Read chapter 2.4.2.2
To Next Page
Loading...