89
Port isolation configuration commands
Port isolation configuration commands
display port-isolate group
Syntax
display port-isolate group [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display port-isolate group command to display information about isolation group 1.
The S5120-EI series switches support only one isolation group.
Examples
# Display information about isolation group 1.
<Sysname> display port-isolate group
Port-isolate group information:
Uplink port support: NO
Group ID: 1
Group members:
GigabitEthernet1/0/2
Table 21 Output description
Field Description
Uplink port support
The 5120-EI series switches do not support the uplink port
configuration for port isolation.
Group ID Isolation group number.
Group members Isolated ports in the isolation group.
To Next Page
Loading...
