H3C S5120-EI Series - Display Mac-Vlan Interface; Mac-Vlan Enable

156
Field Description
• D—The MAC address-to-VLAN entry is configured automatically through
the authentication server.
• S&D—The MAC address-to-VLAN entry is configured both statically and
dynamically.
display mac-vlan interface
Syntax
display mac-vlan interface [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256
characters.
Description
Use the display mac-vlan interface command to display all the ports with MAC address-based VLAN
enabled.
Related commands: mac-vlan enable.
Examples
# Display all the interfaces with MAC address-based VLAN enabled.
<Sysname> display mac-vlan interface
MAC VLAN is enabled on following ports:
---------------------------------------
GigabitEthernet1/0/1 GigabitEthernet1/0/2 GigabitEthernet1/0/3
mac-vlan enable
Syntax
mac-vlan enable
undo mac-vlan enable
View
Layer 2 Ethernet port view