H3C S5120-EI Series - Ethernet Link Aggregation Configuration Commands; Description; Display Interface Bridge-Aggregation

68
Ethernet link aggregation configuration
commands
Ethernet link aggregation configuration commands
description
Syntax
description text
undo description
View
Layer 2 aggregate interface view
Default level
2: System level
Parameters
text: Specifies the interface description, a string of 1 to 80 characters. Valid characters and symbols
include English letters (A to Z, a to z), digits (0 to 9), special English characters, spaces, and other
Unicode characters and symbols.
Description
Use the description command to configure a description for an interface. For example, you can include
information such as the purpose of the interface for the ease of management.
Use the undo description command to restore the default.
By default, the description of an interface is interface-name Interface. For example, the default
description of Bridge-Aggregation1 is Bridge-Aggregation1 Interface.
Examples
# Set the description of Layer 2 aggregate interface Bridge-Aggregation 1 to connect to the lab.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] description connect to the lab
display interface bridge-aggregation
Syntax
display interface bridge-aggregation [ brief [ down ] ] [ | { begin | exclude | include }
regular-expression ]
display interface bridge-aggregation interface-number [ brief ] [ | { begin | exclude | include }
regular-expression ]