H3C S5120-EI Series - Mac-Address Information Enable (System View); Mac-Address Information Interval

65
mac-address information enable (system view)
Syntax
mac-address information enable
undo mac-address information enable
View
System view
Default level
2: System level
Parameters
None
Description
Use the mac-address information enable command to enable MAC Information globally.
Use the undo mac-address information enable command to disable MAC Information globally.
By default, MAC Information is disabled globally.
Examples
# Enable MAC Information globally.
<Sysname> system-view
[Sysname] mac-address information enable
mac-address information interval
Syntax
mac-address information interval value
undo mac-address information interval
View
System view
Default level
2: System level
Parameters
value: Sets the interval for sending Syslog or trap messages, ranging from 1 to 20000 seconds.
Description
Use the mac-address information interval command to set the interval for sending Syslog or trap
messages.
Use the undo mac-address information interval command to restore the default interval for sending
Syslog or trap messages.
By default, the interval for sending Syslog or trap messages is 1 second.
Examples
# Set the interval for sending Syslog or trap messages to 200 seconds.