H3C S5120-EI Series Command Reference

162
Protocol Index Protocol Type
======================================================
0 ipv4
3 ipv6
VLAN ID:3
Protocol Index Protocol Type
======================================================
0 ipv4
1 ipv6
For more information about the output fields, see Table 36.
port hybrid protocol-vlan
Syntax
port hybrid protocol-vlan vlan vlan-id { protocol-index [ to protocol-end ] | all }
undo port hybrid protocol-vlan { vlan vlan-id { protocol-index [ to protocol-end ] | all } | all }
View
Ethernet interface view, port group view, Layer 2 aggregate interface view
Default level
2: System level
Parameters
vlan vlan-id: Specifies a VLAN ID, ranging from 1 to 4094.
protocol-index: Specifies a protocol index. The value can be specified by the users or assigned by the
system automatically when the protocol-based VLAN is created. You can use the display protocol-vlan
vlan all command to display the protocol indexes.
to protocol-end: Specifies the end protocol index. The protocol-end argument must be greater than or
equal to the beginning protocol index.
all: Specifies all protocols bound to vlan-id.
Description
Use the port hybrid protocol-vlan command to associate the hybrid port(s) with a protocol-based VLAN.
Use the undo port hybrid protocol-vlan command to remove the association.
In port group view, this command applies to all ports in the port group. For more information about port
groups, see the Layer 2—LAN Switching Configuration Guide.
The configuration made in Layer 2 aggregate interface view applies to the aggregate interface and its
aggregation member ports.
• If the system fails to apply the configuration to the aggregate interface, it stops applying the
configuration to aggregation member ports.
• If the system fails to apply the configuration to an aggregation member port, it skips the port and
moves to the next member port.
For more information about Layer 2 aggregate interfaces, see the Layer 2—LAN Switching
Configuration Guide.
Before you use this command, make the following configurations:

H3C S5120-EI Series Specifications

General

Brand	H3C
Model	S5120-EI Series
Category	Switch
Language	English