H3C S5120-EI Series - Link-Aggregation Load-Sharing Mode Local-First; Link-Aggregation Mode

85
Examples
# Configure the destination MAC address as the global link-aggregation load sharing criterion.
<Sysname> system-view
[Sysname] link-aggregation load-sharing mode destination-mac
# Configure the destination MAC address as the load sharing criterion specific to the link aggregation
group of the Bridge-Aggregation 1 interface.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] link-aggregation load-sharing mode destination-mac
link-aggregation load-sharing mode local-first
Syntax
link-aggregation load-sharing mode local-first
undo link-aggregation load-sharing mode local-first
View
System view
Default level
2: System level
Parameters
None
Description
Use the link-aggregation load-sharing mode local-first command to enable local-first load sharing for
link aggregation.
Use the undo link-aggregation load-sharing mode local-first command to disable local-first load sharing
for link aggregation.
By default, local-first load sharing is enabled for link aggregation.
Examples
# Disable local-first load sharing for link aggregation.
<Sysname> system-view
[Sysname] undo link-aggregation load-sharing mode local-first
link-aggregation mode
Syntax
link-aggregation mode dynamic
undo link-aggregation mode
View
Layer 2 aggregate interface view
Default level
2: System level