H3C S5120-EI Series - Display Gvrp Status; Display Gvrp Vlan-Operation

190
Table 44 Output description
Field Description
GVRP Status Indicates whether GVRP is enabled or disabled
GVRP Running Indicates whether GVRP is running
GVRP Failed Registrations Indicates the number of GVRP registration failures
GVRP Last Pdu Origin Indicates the source MAC address in the last GVRP PDU
GVRP Registration Type
Indicates the GVRP registration mode on the port, which
can be fixed, forbidden, or normal
display gvrp status
Syntax
display gvrp status [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display gvrp status command to display the global enable/disable state of GVRP.
Examples
# Display the global GVRP enable/disable state.
<Sysname> display gvrp status
GVRP is enabled
display gvrp vlan-operation
Syntax
display gvrp vlan-operation interface interface-type interface-number [ | { begin | exclude | include }
regular-expression ]
View
Any view