H3C S5120-EI Series - Display Link-Aggregation Member-Port

74
display link-aggregation member-port
Syntax
display link-aggregation member-port [ interface-list ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface-list: Specifies a list of link aggregation member ports, in the format of interface-type
interface-number [ to interface-type interface-number ], where interface-type interface-number indicates
port type and port number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display link-aggregation member-port command to display the detailed link aggregation
information on the specified member ports or all member ports if no interface is specified.
For a member port in a static aggregation group, only its port number and operational key are displayed,
because it is not aware of the information of the partner.
Examples
# Display the detailed link aggregation information of GigabitEthernet 1/0/1, a member port of a static
aggregation group.
<Sysname> display link-aggregation member-port gigabitethernet 1/0/1
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
GigabitEthernet1/0/1:
Aggregation Interface: Bridge-Aggregation1
Port Number: 1
Oper-Key: 1
# Display the detailed link aggregation information of GigabitEthernet 1/0/2, a member port of a
dynamic aggregation group.
<Sysname> display link-aggregation member-port gigabitethernet 1/0/2
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,