H3C S5120-EI Series - Lldp Notification Remote-Change Enable; Lldp Timer Notification-Interval

223
lldp notification remote-change enable
Syntax
lldp notification remote-change enable
undo lldp notification remote-change enable
View
Layer 2 Ethernet interface view, port group view
Default level
2: System level
Parameters
None
Description
Use the lldp notification remote-change enable command to enable LLDP trapping for a port or all the
ports in a port group.
Use the undo lldp notification remote-change enable command to restore the default.
By default, LLDP trapping is disabled on a port.
Examples
# Enable LLDP trapping for GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] lldp notification remote-change enable
lldp timer notification-interval
Syntax
lldp timer notification-interval interval
undo lldp timer notification-interval
View
System view
Default level
2: System level
Parameters
interval: Sets the interval to send LLDP traps, ranging from 5 to 3600 seconds.
Description
Use the lldp timer notification-interval command to set the interval to send LLDP traps.
Use the undo lldp timer notification-interval command to restore the default.
By default, the interval to send LLDP traps is 5 seconds.
Examples
# Set the interval to send LLDP traps to 8 seconds.