94
[Sysname-mst-region] check region-configuration
Admin Configuration
Format selector :0
Region name :000fe26a58ed
Revision level :0
Configuration digest :0x41b5018aca57daa8dcfdba2984d99d06
Instance Vlans Mapped
0 1 to 9, 11 to 4094
15 10
Table 22 Output description
Field Description
Format selector
Format selector of the MST region, which is 0 by default and
cannot be configured.
Region name MST region name.
Revision level Revision level of the MST region.
Instance Vlans Mapped VLAN-to-instance mappings in the MST region.
display stp
Syntax
display stp [ instance instance-id ] [ interface interface-list | slot slot-number ] [ brief ] [ | { begin |
exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
instance instance-id: Displays the status and statistics of a particular MSTI, where instance-id ranges from
0 to 16 and 0 represents the common internal spanning tree (CIST).
interface interface-list: Displays the MSTP status and statistics on the ports specified by a port list, in the
format of interface-list = { interface-type interface-number [ to interface-type interface-number ] }&<1-10>,
where &<1-10> indicates that you can specify up to 10 ports or port ranges.
slot slot-number: Displays the MSTP status and statistics on the specified IRF member device. slot-number
represents the member number of the device in the IRF. If this keyword-argument combination is not
specified, this command displays the MSTP status and statistics on all IRF member devices. If the switch
does not support Intelligent Resilient Framework (IRF), the slot-number argument must be 1.
brief: Displays brief MSTP status and statistics.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
To Next Page
Loading...
