H3C S5120-EI Series - Display Storm-Constrain

18
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display port-group manual command to display information about port groups.
If the all keyword is specified, this command displays the name and member Ethernet interfaces of each
port group on the device.
If a port group is specified, this command displays its name and member Ethernet interfaces.
If you specify neither the all keyword nor a port group name, the command displays the name of each
port group on the device.
Examples
# Display the names of all port groups.
<Sysname> display port-group manual
The following manual port group exist(s):
group1 group2
# Display detailed information about all port groups.
<Sysname> display port-group manual all
Member of group1:
GigabitEthernet1/0/3 GigabitEthernet1/0/4 GigabitEthernet1/0/5
GigabitEthernet1/0/6 GigabitEthernet1/0/7
Member of group2:
None
# Display detailed information about port group group1.
<Sysname> display port-group manual name group1
Member of group1:
GigabitEthernet1/0/3 GigabitEthernet1/0/4 GigabitEthernet1/0/5
GigabitEthernet1/0/6 GigabitEthernet1/0/7
display storm-constrain
Syntax
display storm-constrain [ broadcast | multicast | unicast ] [ interface interface-type interface-number ]
[ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level