H3C S5120-EI Series - Display Stp Abnormal-Port

99
Field Description
PortTimes
Major parameters for the port:
• Hello—Hello timer
• MaxAge—Max Age timer
• FWDly—Forward delay timer
• MsgAge—Message Age timer
• Remain Hop—Remaining hops
BPDU Sent Statistics on sent BPDUs.
BPDU Received Statistics on received BPDUs.
MSTI RegRoot/IRPC MSTI regional root/internal path cost.
MSTI RootPortId MSTI root port ID.
MSTI Root Type MSTI root type, which can be primary root or secondary root.
Master Bridge MSTI root bridge ID.
Cost to Master Path cost from the MSTI to the master bridge.
TC received Number of received TC BPDUs.
Protocol Status MSTP protocol status.
Protocol Std. MSTP protocol standard.
Version MSTP protocol version.
CIST Bridge-Prio. The switch’s priority in the CIST.
MAC address MAC address of the switch.
Max age(s) Aging timer (in seconds) for BPDUs.
Forward delay(s) Port state transition delay (in seconds).
Hello time(s) Interval (in seconds) for the root bridge to send BPDUs.
Max hops Maximum hops in the MSTI.
display stp abnormal-port
Syntax
display stp abnormal-port [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.