H3C S5120-EI Series Command Reference

140
Name: VLAN 0002
Tagged Ports: none
Untagged Ports:
GigabitEthernet1/0/1 GigabitEthernet1/0/2 GigabitEthernet1/0/3
# Display VLAN 3 information.
<Sysname> display vlan 3
VLAN ID: 3
VLAN Type: static
Route Interface: configured
IP Address: 1.1.1.1
Subnet Mask: 255.255.255.0
Description: VLAN 0003
Name: VLAN 0003
Tagged Ports: none
Untagged Ports: none
Table 33 Output description
Field Description
VLAN Type VLAN type (static or dynamic).
Route interface
Whether a VLAN interface is configured for the VLAN: not configured or
configured.
Description Description of the VLAN.
Name Name configured for the VLAN.
IP Address
Primary IP address of the VLAN interface (available only on a VLAN interface
configured with an IP address). You can use the display interface
vlan-interface command in any view or the display this command in VLAN
interface view to display its secondary IP address(es), if any.
Subnet Mask
Subnet mask of the primary IP address (available only on a VLAN interface
configured with an IP address).
Tagged Ports Ports through which packets of the VLAN are sent tagged.
Untagged Ports Ports through which packets of the VLAN are sent untagged.
interface vlan-interface
Syntax
interface vlan-interface vlan-interface-id
undo interface vlan-interface vlan-interface-id
View
System view
Default level
2: System level
Parameters
vlan-interface-id: Specifies a VLAN interface number, ranging from 1 to 4094.

H3C S5120-EI Series Specifications

General

Brand	H3C
Model	S5120-EI Series
Category	Switch
Language	English