H3C S5120-EI Series - Display Gvrp Local-Vlan; Display Gvrp State

187
Garp Join Time : 20 centiseconds
Garp Leave Time : 60 centiseconds
Garp LeaveAll Time : 1000 centiseconds
Garp Hold Time : 10 centiseconds
display gvrp local-vlan
Syntax
display gvrp local-vlan interface interface-type interface-number [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
0: Visit level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display gvrp local-vlan command to display the local VLAN information maintained by GVRP on
the specified port.
Examples
# Display the local VLAN information maintained by GVRP on GigabitEthernet 1/0/1.
<Sysname> display gvrp local-vlan interface gigabitethernet 1/0/1
Following VLANs exist in GVRP local database:
1(default),2-500
display gvrp state
Syntax
display gvrp state interface interface-type interface-number vlan vlan-id [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
0: Visit level