H3C S5120-EI Series - Page 200

188
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
vlan vlan-id: Specifies a VLAN ID, in the range of 1 to 4094.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display gvrp state command to display GVRP state machines in a specified VLAN on a port.
Examples
# Display GVRP state machines in VLAN 2 on port GigabitEthernet 1/0/1.
<Sysname> display gvrp state interface gigabitethernet 1/0/1 vlan 2
GVRP state of VLAN 2 on port GigabitEthernet1/0/1
Applicant state machine : VP
Registrar state machine : MTR
Table 43 Output description
Field Description
GVRP state of VLAN 2 on port
GigabitEthernet1/0/1
Information about the GVRP state machines in VLAN 2
on port GigabitEthernet 1/0/1
Applicant state machine
The Applicant state machine handles attribute
declarations. Its state can be VA, AA, QA, LA, VP, AP,
QP, VO, AO, QO, LO, VON, AON, and QON. Each
state consists of two or three letters with the following
meanings:
• The first letter indicates the state: V for Very anxious,
A for Anxious, Q for Quiet, and L for Leaving.
• The second letter indicates the membership state: A
for Active member, P for Passive member, and O for
Observer, and N (if any) for Non-participant.
For example, VP indicates “Very anxious, Passive
member".
Registrar state machine
The Registrar state machine records the registration of
attributes declared by other participants. Its state can
be INN, LV, L3, L2, L1, MT, INR, LVR, L3R, L2R, L1R,
MTR, INF, LVF, L3F, L2F, L1F, and MTF. Each state
consists of two or three letters or numbers with the
following meanings:
• The first two letters or numbers indicate the state: IN
stands for In; LV, L3, L2, and L1 all stand for Leaving,
and L3, L2, L1 are three sub-states of LV; MT stands
for Empty
• The third letter indicates the registration mode: N (if