H3C S5120-EI Series Command Reference

79
Table 20 Output description
Field Description
Loadsharing Type
Load sharing type:
• Shar for load sharing.
• NonS for non-load sharing.
Port Status Port state: Selected or unselected.
Flags
LACP state flags:
• A—LACP is enabled.
• B—Indicates the LACP short timeout.
• C—The sending system detects that the link is aggregatable.
• D—The sending system detects that the link is synchronized.
• E—The sending system detects that the incoming frames are collected.
• F—The sending system detects that the outgoing frames are distributed.
• G—The sending system receives frames in the default state.
• H—The sending system receives frames in the expired state.
Aggregation Interface Name of the aggregate interface.
Aggregation Mode
Mode of the aggregation group: Static for static aggregation, and Dynamic for
dynamic aggregation.
System ID
Local system ID, comprising the system LACP priority and the system MAC
address.
Local Information about the local end.
Port Port type and number.
Status Port state: selected or unselected.
Priority Port LACP priority.
Oper-Key Operational key.
Flag LACP protocol state flag.
Remote Information about the remote end.
Actor Local port type and number.
Partner Remote port index.
enable snmp trap updown
Syntax
enable snmp trap updown
undo enable snmp trap updown
View
Layer 2 aggregate interface view
Default level
2: System level

H3C S5120-EI Series Specifications

General

Brand	H3C
Model	S5120-EI Series
Category	Switch
Language	English