EasyManua.ls Logo

H3C S5120-EI Series - Page 90

H3C S5120-EI Series
242 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
78
To display the information of a specific Layer 2 aggregation group, use the display link-aggregation
verbose bridge-aggregation interface-number command.
To display the information of all aggregation groups, use the display link-aggregation verbose
command.
The bridge-aggregation keyword becomes available only after you create Layer 2 aggregate interfaces
on the device.
Examples
# Display the detailed information of the aggregation group corresponding to Layer 2 aggregate
interface Bridge-Aggregation 10, which is a dynamic aggregation group.
<Sysname> display link-aggregation verbose bridge-aggregation 10
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregation Interface: Bridge-Aggregation10
Aggregation Mode: Dynamic
Loadsharing Type: Shar
System ID: 0x8000, 000f-e267-6c6a
Local:
Port Status Priority Oper-Key Flag
-------------------------------------------------------------------------------
GE1/0/2 S 32768 2 {ACDEF}
GE1/0/3 S 32768 2 {ACDEF}
Remote:
Actor Partner Priority Oper-Key SystemID Flag
-------------------------------------------------------------------------------
GE1/0/2 32 32768 2 0x8000, 000f-e267-57ad {ACDEF}
GE1/0/3 26 32768 2 0x8000, 000f-e267-57ad {ACDEF}
# Display the detailed information of the aggregation group corresponding to Layer 2 aggregate
interface Bridge-Aggregation 20, which is a static aggregation group.
<Sysname> display link-aggregation verbose bridge-aggregation 20
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregation Interface: Bridge-Aggregation20
Aggregation Mode: Static
Loadsharing Type: Shar
Port Status Oper-Key
--------------------------------------------------------------------------------
GE1/0/1 U 1

Table of Contents

Other manuals for H3C S5120-EI Series

Related product manuals