105
Port GigabitEthernet1/0/2
Role change : ALTER->ROOT
Time : 2009/02/08 00:22:56
Port priority : 0.00e0-fc01-6510 0 0.00e0-fc01-6510 128.2
Table 28 Output description
Field Description
Port Port name.
Role change
A role change of the port (“Age” means that the change was caused by expiration
of the received configuration BPDU).
Time Time of port role calculation.
Port priority Port priority.
display stp region-configuration
Syntax
display stp region-configuration [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display stp region-configuration command to display effective configuration information of the
MST region, including the region name, revision level, and user-configured VLAN-to-instance mappings.
Related commands: instance, region-name, revision-level, and vlan-mapping modulo.
Examples
# Display effective MST region configuration information.
<Sysname> display stp region-configuration
Oper Configuration
Format selector :0
Region name :hello
Revision level :0
Configuration digest :0x5f762d9a46311effb7a488a3267fca9f
To Next Page
Loading...
