H3C S5120-EI Series - Display Port-Group Manual

17
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display port combo command to display the Combo interfaces of the device and the
corresponding optical ports and electrical ports.
Examples
# Display the Combo interfaces of the device and the corresponding optical ports and electrical ports.
<Sysname> display port combo
Combo-group Active Inactive
1 GigabitEthernet2/0/11 GigabitEthernet2/0/25
2 GigabitEthernet2/0/12 GigabitEthernet2/0/26
3 GigabitEthernet2/0/23 GigabitEthernet2/0/27
4 GigabitEthernet2/0/24 GigabitEthernet2/0/28
Table 8 Output description
Field Description
Combo-group
Combo interfaces of the device, represented by Combo interface numbers that are
generated by the system.
Active Active ports of the Combo interfaces.
Inactive Inactive ports of Combo interfaces.
In a Combo interface, the optical or electrical port with the smaller port number is active by default. You
can determine whether a port is an optical port or an electrical port by checking the “Media type is” field
of the display interface command.
display port-group manual
Syntax
display port-group manual [ all | name port-group-name ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
2: System level
Parameters
all: Displays information about all port groups.
name port-group-name: Specifies the name of a port group, a string of 1 to 32 characters.