EasyManua.ls Logo

H3C S5120-EI Series - Page 87

H3C S5120-EI Series
242 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
75
G -- Defaulted, H -- Expired
GigabitEthernet1/0/2:
Aggregation Interface: Bridge-Aggregation10
Local:
Port Number: 2
Port Priority: 32768
Oper-Key: 2
Flag: {ACDEF}
Remote:
System ID: 0x8000, 000f-e267-6c6a
Port Number: 26
Port Priority: 32768
Oper-Key: 2
Flag: {ACDEF}
Received LACP Packets: 5 packet(s)
Illegal: 0 packet(s)
Sent LACP Packets: 7 packet(s)
Table 18 Output description
Field Description
Flags
LACP state flags:
A—LACP is enabled.
B—Indicates the LACP short timeout.
C—The sending system detects that the link is aggregatable.
D—The sending system detects that the link is synchronized.
E—The sending system detects that the incoming frames are collected.
F—The sending system detects that the outgoing frames are distributed.
G—The sending system receives frames in the default state.
H—The sending system receives frames in the expired state.
Aggregation Interface Aggregate interface to which the current member port belongs.
Local Information about the local end.
Port Number Number of the port.
Port Priority LACP priority of the port.
Oper-key Operational key.
Flag LACP protocol state flag.
Remote Information about the remote end.
System ID
System ID of the remote end, comprising the system LACP priority and the system
MAC address.
Received LACP Packets Total number of LACP packets received.
Illegal Total number of illegal packets.
Sent LACP Packets Total number of LACP packets sent.

Table of Contents

Other manuals for H3C S5120-EI Series

Related product manuals